RS485 data surge arrester 30Vdc

FS-DR-30/7.0

- Din rail RS485 datasurge arresters are applied to control signal double wire circuit in LPZ0 to LPZ3, e.g. 4~20mA circuit, RS485 circuit, RS422 circuit, gas detector, car-park system, CCTV remote monitor, remote control circuits.
- Common and difference surge protection mode, excellent performance.
- The pluggable module allows a fast replacement in case of fail.
- The grounding is realized through an earthing-clip on the DIN-Rail and / or earthing – clamp.
- No limiting in operating current due to parallel connecting method.
- Mounting on 35mm Rail, small space.
-Un 30Vdc, Uc 34.8Vdc

1.Dimension and circuit diagram of RS485 data surge arrester FS-DR-30/7.0



2.Electrical parameters of RS485 data surge arrester FS-DR-30/7.0

Rated voltage

Un

30 V

Max. cont. operating DC voltage

Uc

34.8 V

Max. cont. operating AC voltage

Uc

24.5 V

Rated current

1 A

Nominal discharge current (8/20μs)

In

5 kA

Max. discharge current (8/20μs)

Imax

10 kA

Voltage protection level L/L(limp D1)

Up

≤ 130 V

Voltage protection level L/PE (limp D1)

Up

≤ 80 V

Each line sereis resistance

1.8 Ohm

Band width L/L

7.0 MHz

Capacitance L/L

C

≤0.6nF

Capacitance L/PE

C

≤1.1nF

Installation

35mm DIN Rail

Enclosure color

Yellow or Gray

Testing standard

IEC 61643-21:2000



Inquiry

10 years of experience, is worthy of trust!
FATECH sincerely look forward to providing customers with various series lightning protection products, quality and professional lightning protection system solutions.
© Copyright 2017 Fatech Electronic CO., LTD. All Rights Reserved.