RS485 signal surge arrester 24Vdc

FS-DR-24/5.6

- Din rail signal surge arresters are applied to control signal double wire circuit in LPZ0 to LPZ3, e.g. 4~20mA circuit, RS485 circuit, RS422 circuit, gas detector, car-park system, CCTV remote monitor, remote control circuits.
- Common and difference surge protection mode, excellent performance.
- The pluggable module allows a fast replacement in case of fail.
- The grounding is realized through an earthing-clip on the DIN-Rail and / or earthing – clamp.
- No limiting in operating current due to parallel connecting method.
- Mounting on 35mm Rail, small space.
-Un 24Vdc, Uc 26.8Vdc

1.Dimension and circuit diagram of RS485 signal surge arrester FS-DR-24/5.6



2.Electrical parameters of RS485 signal surge arrester FS-DR-24/5.6
Rated voltage
Un
24 V
Max. cont. operating DC voltage
Uc
26.8 V
Max. cont. operating AC voltage
Uc
18.9 V
Rated current
1 A
Nominal discharge current (8/20μs)
In
5 kA
Max. discharge current (8/20μs)
Imax
10 kA
Voltage protection level L/L(limp D1)
Up
≤ 100 V
Voltage protection level L/PE (limp D1)
Up
≤ 80 V
Each line sereis resistance
1.8 Ohm
Band width L/L
5.6 MHz
Capacitance L/L
C
≤0.7nF
Capacitance L/PE
C
≤1.3nF
Installation
35mm DIN Rail
Enclosure color
Yellow or Gray
Testing standard
IEC 61643-21:2000

Inquiry

10 years of experience, is worthy of trust!
FATECH sincerely look forward to providing customers with various series lightning protection products, quality and professional lightning protection system solutions.
© Copyright 2017 Fatech Electronic CO., LTD. All Rights Reserved.