Loading Images

Small Size RJ45 Signal Surge Protector

●Products installed in the computer network port, for network line lightning and surge protection

●Standard module structure for 35mm electrical rail installation

●Meet the requirements of lightning protection and electrical characteristics of Ethernet signal lines

●Two-stage composite discharge design, discharge current is large, fast response, low residual voltage

●Install in series，RJ45 interface

●Mainly used in 100M, 1000Mand PoEnetwork equipment

Product Description

1. Model No.

Products	100-megabit network lightning protection	Gigabit network lightning protection	PoE network lightning protection
Model	FS-RJ45-E100	FS-RJ45-E1000	FS-RJ45-PoE

2. Dimension and Drawing

3.Electrical parameters

Model			FS-RJ45-E100	FS-RJ45-E1000	FS-RJ45-PoE
Maximum continuous operating voltage		U_c	6V-
Maximum continuous operating current		I_L	——		1A
Nominal discharge current (@8/20µs)	Line/Line	I_n	2kA		30A
	Line/PE		2kA		2kA
Voltage protection level (@ I_n)	Line/Line	U_p	≤15V		≤15V
Voltage protection level (@1kV/µs)	Line/Line	U_p	≤10V		≤10V
	Line/PE		≤450V		≤550V
Response time	Line/Line	t_A	≤1ns		≤1ns
	Line/PE		≤100ns		≤100ns
The data transfer rate		V_s	100Mbit/s	1000Mbit/s	1000Mbit/s
The number of protection lines		——	RJ45(1,2,3,6)	RJ45(1,2,3,4,5,6,7,8)	RJ45(1,2,3,4,5,6,7,8)
Operating temperature		——	-40℃~+80℃
Enclosure material		——	Flame retardant plastic
Degree of enclosure protection		——	IP20

4. Installation