spark gap type 1+2 surge arrester 3 phase
- High impulse current multi-layer 3 phase type 1+2 25kA surge arrester.
- With indication window, with remote control contacts,
- Compact design,
-Used in the lightning protection zones concept at boundary LPZ0B-LPZ1,
-The core parts are spark gap with high discharge capacity,
-35mm2 DIN-rail in accordance with EN 50022/DIN46277-3,
-Low residual voltage and quick response.
-Protection mode: L1, L2,L3-N, N-PE.
Product Description
2. Electrical parameters of surge arrester FV25B/3+NPE-255 S
Model. No. |
FV25B/3+NPE-255S |
SPD protection conforms to IEC61643-11 / EN61643-11 |
Type 1+2 |
SPD installation type conforms to IEC61643-11 / EN61643-11 |
ClassI+II |
Protection level conforms to DIN VDE0675-6 |
B+C |
Type of Network |
TT |
Protectionmode |
L-N , N-PE |
Nominal Voltage UN |
230/440 Vac/50(60)Hz |
Maximum continuous operating voltage UC |
255 Vac/50(60)Hz |
Continuous operating current IC |
<20 µA |
Residual current IPE |
≤20 µA dc ≤500 µA ac |
Standby power consumption PC |
≤25 mVA |
Nominal discharge current (8/20μs)[L-N]/[N-PE] In |
≥25/100 kA |
Impuse discharge current (10/350μs) [L-N]/[N-PE] Iimp |
≥25/100kA |
Voltage protection level Up |
≤1.5 kV |
Isolation resistance Risol |
>1000 MΩ |
Response time tA |
≤100 ns |
Follow up current extinguishing capability [L-N]/[N-PE] |
≥25 kArms / 100 Arms |
Let-Through-Energy in combination with an MOV S20K275 Iimp 0÷25kA(10/350μs) |
≤151 Jouls |
Temporary overvoltage (TOV) |
L-N:≥440 Vac/120 min |
Remote control contact |
YES |
Disconnection indicator |
Mechanical indicator (Green: OK, Red: Replace) |
Minimum area of connecting cable |
16 mm2 |
Maximum area of connecting cable |
35 mm2 |
Installation location |
Inside |
Mounting type |
35mm DIN rail acc. to EN 60715 |
Color |
Gray |
Degree of protection |
IP20 |
Housing material |
UL94V-0 |
Ambient temperature |
-40°C ~+80°C |
Altitude |
≤2000 m (amsl (above mean sea level)) |
Permissible humidity |
30%~90% |
3. Installation of surge arrester FV25B/3+NPE-255 S