TUV certified single phase 60kA surge arrester
2. With thermal cut-off member
3. Modular design, standard 35mm DIN rail installation
4. Working status indication window, and remote control contacts for your option
5. Voltage protection level (Up) is low
6. TUV certified
Product Description
2.Electrical parameters of surge arrester FV30B+C/2-275 (S)
Model. No. |
FV30B+C/2-275S |
SPD protection conforms to IEC61643-11 / EN61643-11 |
Type 1+2 |
SPD installation type conforms to IEC61643-11 / EN61643-11 |
ClassI+II |
Protection level conforms to DIN VDE0675-6 |
B+C |
Type of Network |
TT, TN |
Protectionmode |
L→PE , N→PE |
Nominal Voltage UN |
230 Vac/50(60)Hz |
Maximum continuous operating voltage UC |
275 Vac/50(60)Hz |
Short-circuit withstand capability Isccr |
30 kA |
Continuous operating current IC |
<20 µA |
Residual current IPE |
≤20 µA dc ≤500 µA ac |
Standby power consumption PC |
≤25 mVA |
Maximum discharge current (8/20μs) Imax |
60 kA |
Nominal discharge current (8/20μs) In |
30 kA |
Impuse discharge current (10/350μs) Iimp |
7 kA |
Voltage protection level Up |
≤1.5 kV |
Isolation resistance Risol |
>1000 MΩ |
Response time tA |
≤25 ns |
Remote control contact |
YES |
Disconnection indicator |
Mechanical indicator (Green: OK, Red: Replace) |
I/O Connections |
By screw terminal:10-35mm2 By connection bus |
Installation location |
Inside |
Mounting type |
35mm DIN rail acc. to EN 60715 |
Color |
Gray |
Degree of protection |
IP20 |
Housing material |
UL94V-0 |
Ambient temperature |
-40°C ~+80°C |
Altitude |
≤2000 m (amsl (above mean sea level)) |
Permissible humidity |
30%~90% |
3. Installation of surge arrester FV30B+C/2-275 (S)
4. TUV-mark, TUV-CE certificates