SPD for led lighting
- specifically for outdoor and commercial LED lighting applications, LED signage and traffic light manufacturers, including roadway lighting, parking garage lighting, wash wall lighting, traffic lighting, flood lighting, digital signage, street lightning, and tunneal lighting.
- 6kA lightning surge protection.
- Metal oxide varistor (MOV) thermal protection.
- With built-in thermal disconnect function.
- Waterproof IP66.
Product Description
2. Proposition of SPD for led lighting
2.Circuit of SPD for LED lighting
4. Electrical parameters of LED street light surge protection device
Model. No. |
FLP03-320-S/G |
|
SPD protection conforms to EN 61643-11 |
Type2+3 |
|
SPD installation type conforms to EN 61643-1 |
ClassII+III |
|
Protection level conforms to DIN VED 0675-6 |
C+D |
|
Type of Network |
LED street light |
|
Protectionmode |
L - N , N - PE , L - PE |
|
Nominal Voltage 50(60)Hz UN |
230V~ |
|
Maximum continuous operating voltage UC |
320V~ |
|
Maximum discharge current (8/20μs) Imax |
6kA |
|
Nominal discharge current (8/20μs) In |
3kA |
|
Voltage protective level Up |
L-N |
≤ 1.3kV |
N-PE |
≤ 0.6kV |
|
L-PE |
≤ 1.5kV |
|
Open circuit voltage Uoc |
6kV |
|
Response time tA |
L-N |
≤25ns |
N-PE |
≤100ns |
|
Recommended back-up fuse |
16AgL/gG |
|
Thermal Cut-off Temperature |
150℃ |
|
Disconnection indicator |
Without |
|
Wire length |
150MM |
|
Degree of protection |
IP66 |
|
Housing material |
UL94V-0 |
|
Ambient temperature |
-40°C ~+80°C |
|
Altitude |
≤2000m (amsl (above mean sea level)) |
|
Permissible humidity |
30%~90% |
5. Application of LED street light surge protection module FLP05-xxx-P/S